ROVworld Subsea Information

Register Today for Underwater Intervention 2017
ROVworld Subsea Information: Forums

View next topic
View previous topic
Quote
Guys,

I am on the lookout for a set of sliprings for our Falcon. They would be fitted to a Hydro Products DS300 LARS with Garage/TMS.

I can provide a bit more info with regards to the main lift umbilical spec should any of you feel that you have something suitable.

Cheers,
Mike
Quote
Hi Mike

Nice to hear you have one of the old 225 tms and lars you can have a chat with Tim Brown of Seaworks in New Zealand as he runs the same as you .
You should be able to pick one up via Deep Search as many companys are clearing out the yards from the good old days of 225s .
Web: www.m-are.com

Cheers for now

Subman
Quote
You could use short wire jumpers of the maximum wire size that will fit in the terminals where the resistors were connected, but it is better to remove the brush holders etc. and fasten short bus bars across the through bore slip rings. If you leave the brushes and they spark, the VFD might have a problem.



slip rings
revolving joint
rotaryjoint rotary joint

Display posts from previous:







View next topic
View previous topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum