Search found 28 matches

Even if you could isolate each words and get the format from SeaEye you wouldn't know what to do with it. (No offense, but asking such a question gives out your level of knowledge) Even if you did, fi ...

If you did want to do a course I would recommend having a look at NVQ/SVQs in Hydraulics as this would complement your electrical background already. Although most people get classed as "wiggly ...

@rov_er. so you have pretty much narrowed it down to the majority of their hydraulics courses then

4 over 14 courses is not the majority, but still is a lot of courses.
The problem is that whe ...

I am interested too.
They have many courses available and I am wondering which ones are worth to be attended, from an ROV perspective.
By reading the course descriptions I am focused on:
- Stage 1 ...

Childish behaviour in the forum?

Yes.

And it's not just about replies to agencies' posts, it's a more general attitude.

Unfortunately having a decent level of discussion and useful/helpful co ...

What I might also do is create a standard letter and post it in this forum so that it can be copied/pasted and sent to whomever it may have most impact with.

It's a good idea, if OPITO receives doz ...

Hi Chewy,

thank you for your reply.
You are right, my level of knowledge for telemetry comms is not high and I am trying to get an insight and clarify my mind.

The reason for such a question is ...

Hi everybody,

maybe someone already tried this before and can give me some advice.

I would like to get a readable Seaeye telemetry string from the 485/232 converter to a Telnet client (e.g. Hype ...

Thanks for your help guys,

I ended up with a clear overview of what is currently available on the market.

rov_er

Hi all,

I'm looking for products allowing event logging during digital video recording.
Requirements are robustness, ease of use (event logging and video recording are to be managed by the ROV tea ...

Also does the Sonar have a termination resistor fitted top and bottom if needed this may be the cause of the Sonar not talking.

Termination resistors on SCU and subsea head are needed when using A ...

Hi Adam,

I assume the fibre is ok as you can get the telemetry string work properly.

It could be a problem in the 485 channel, have you tried to send the sonar on the channel that worked fine fo ...

Hi wawaron,

1 hp is approximately 736 W, and assuming an umbilical recovery speed of 1 m/s, the maximum weight you can lift is roughly 736/10 = 73.6 kg.

If you decrease the maximum allowed recov ...

Just to make it short, a lot of the "old" guys is sitting home with no job right now so why should they take a new guy on, also many places the client will not pay for a trainee when he can ...