Posted on 04.07.2008 - 06:05 EDT in ROV NEWS by jamesmc
ACCESS Co UK Ltd, Britain’s leading Micro ROV manufacturer has delivered an ACROV Underwater Inspection System to FMC Technologies Ltd.
FMC Technologies, the leading manufacturer and supplier of subsea production systems, had a requirement to update and improve the visual inspection of subsea equipment within their test tank. Historically, a network of dropper cameras has been used to monitor the testing of equipment.
The biggest problem that FMC testers had was differentiating between leaks and air pockets, because dropper cameras could not get in close enough and were extremely difficult to manipulate. This and the fact that many areas could not be accessed with a dropper camera caused major testing delays. A solution was required to overcome these problems. FMC decided to go ahead with the purchase of the ACROV after a very successful trial at their Dunfermline site. It took approximately half an hour from vehicle deployment for the FMC chargehands to give a resounding thumb’s up to the ACROV.
After witnessing the vehicles amazing mobility, picture quality and easy control they realized how much ‘test time’ would be saved, as a result of the ACROV’s ability to ingress all
but the smallest spaces in the fabric of the subsea tree used for the purposes of the trial.
Two hours after deployment, three chargehands had enough piloting skill to fly the ACROV under the tree and up the bore (9.5” dia.) – an area previously out of reach to to dropper cameras and other underwater visual inspection tools. The connectors housed inside the bore were viewed with ease and the vehicle was piloted back out each time with out incident. Managers at FMC were impressed by the robustness of the vehicle, the small area the system required for deployment and the price of the system against potential and significant time and cost savings.
Mr Callum Magee of ACCESS points to this sale as helping reinforce the ACROV as the only serious micro ROV for confined ingress inspection work.