ROVworld Subsea Information

Total Resumes Production From the Elgin/Franklin Area in the UK North Sea
Date: Thursday, March 28, 2013 @ 08:15:00 EDT
Topic: GENERAL NEWS


Total Total announces the restart of production on the Elgin/Franklin area on 9 March 2013, following the approval of the safety case by the UK Health and Safety Executive (HSE). Production resumes gradually and should soon reach close to 70,000 barrels of oil equivalent per day (boed; approximately 30,000 boed in Total’s share), that is to say 50% of the production potential from the fields.



West Franklin's Map In order to recover by 2015 the production level which existed before the Elgin incident, a redevelopment project envisaging drilling of new infill wells on Elgin and Franklin is currently under study.

 

In addition, the West Franklin Phase II development project remains ongoing with production start-up scheduled for 2014.

 

Commenting on the restart of the fields, Yves-Louis Darricarrère, President of Total Upstream, said: “Managing this industrial incident securely for our personnel and with limited impact on the environment was our priority. The causes of the incident are now known and all necessary measures have been taken to enable us to resume production and carry out future exploitation of the fields from the Elgin/Franklin area in the best safety conditions. Lessons learnt have been shared with the UK authorities and will also be shared with the wider industry. We now focus on continuing our development plans to bring back the full potential from these fields the soonest possible.”

 

Production from the Elgin/Franklin area, which includes the Elgin, Franklin, West Franklin and Glenelg fields, totalled over 700 millions of barrels of oil equivalent (Mboe) by the end of 2012. The remaining reserves are in excess of 500 Mboe and were not impacted by the Elgin incident.

 

Production was stopped since 25 March 2012 when a gas leak caused by a combination of several unprecedented events occurred on the G4 well shut-in several months before. A thorough investigation led by Total revealed that the leak was caused by a type of stress corrosion which was unique to the G4 well and was fed from a so far non-producing chalk layer located approximately 1,000 meters above the original reservoir. 


  
The conclusions of this investigation have been taken into account to ensure that current and future operations are carried out with the utmost safety. A number of wells will be permanently abandoned and others will be evaluated additionally.

 


 

For further information:

Send an e-mail to Media Relations







This article comes from ROVworld Subsea Information
http://www.rovworld.com

The URL for this story is:
http://www.rovworld.com/modules.php?name=News&file=article&sid=6520